Removing And Installing Auxiliary Heater Control Module - Ar83.70-D-5937EA

Model 907.6/7 

with code H11 (Auxiliary hot-air heater) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove heater (4) from housing.		AR83.70-D-5399TSR
2	Release and disconnect electrical connectors (2, 3).
3	Remove bolts (5).	: Screw in screws (5) in a crosswise pattern.
4	Detach control unit (1) from heater (4).	: Ensure that seal (7) is seated correctly before mounting control unit (1).
5	Remove seal (6) from control unit (1).	If control unit (1) is replaced.
6	Install in the reverse order.