LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2019 >> Sprinter 3500XD Van Cargo, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3190 (Electronic Control Modules (Service Information)) >> Module, HVAC >> Removal And Installation >> Rear >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Rear: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Illustration shown with instrument panel removed from view for clarity.

GC0177624Courtesy of CHRYSLER GROUP, LLC
  1. Position the HVACR module (2) to the housing.
  2. Install and securely tighten the two HVACR module to housing screws (1).
  3. Connect the HVACR module wire harness connector (3).
  4. Install the right rear quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  6. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals