Remove/Install Position Sensor Of Right Cylinder Bank Intake Camshaft - Ar07.04-D-0053TSV
Engine 642 in model 907
| Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. Do not fill engine oil into beverage containers. |
AS18.00-Z-0001-01A | |
| Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | ||
| Remove/install | |||
| 1 | Remove trim panel on right cylinder head cover | AR01.20-D-5017TSV | |
| 2 | Disconnect electrical connection (2) | ||
| 3 | Remove screw/bolt (3) | *BA07.04-N-1002-02TSV | |
| 4 | Remove position sensor (1) | Depending on findings ↓ Replace damaged sealing ring. |
|
| 5 | Install in the reverse order | ||
| Check | |||
| Risk of accident
from vehicle starting off by itself when engine running. Risk of injury
(bruises and burns) resulting from working on the engine while it is being started or when it is running. |
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 6 | Check for leaktightness with engine running |
| Number | Designation | Engine 642 in model 907 | |
|---|---|---|---|
| BA07.04-N-1002-02TSV | Screw/bolt, camshaft position sensor to cylinder head cover | Nm | 8 |