Remove/Install Fan SHROUC - Ar20.40-D-6800TSV
Engine 642 in model 907
| Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A | |
| Remove/install | |||
| 1 | Remove air filter housing. | AR09.10-D-1150TSV | |
| 2 | Unclip the hose (2) and place it to one side. | ||
| 3 | Detach the hose (3) from the cooler. | Collection bowl |
|
| Fig 2 | |||
| Fig 5 | |||
| Fig 3 | |||
| 4 | Remove cover (4). | ||
| 5 | Disconnect electrical connector (5). | ||
| 6 | Remove bolt (6). | ||
| 7 | Place the electrical line (7) outside of the working area. | ||
| 8 | Remove the support (9). | ||
| 9 | Unscrew the nuts (10) and place the fan (11) in the fan cowl (1). Note on calculation of tightening torque when using insertion or socket tools with various effective lengths |
AH00.00-P-0015-01CW | |
| *BA20.40-N-1002-01TS | |||
| Fig 6 | |||
| Fig 1 | |||
| Fig 4 | |||
| 10 | Release the fan cowl (1) at the catch hooks (12) and pull upward. | ||
| 11 | Remove the fan cowl (1) together with the fan (11) by moving it upward. | Carefully remove the fan cowl (1) with the fan (11). Neighboring assembly parts can get damaged otherwise. |
|
| 12 | Install the guard plate on the cooler. | If further work is carried out in the area of the cooler. | |
| Guard plate for radiator/condenser | WF58.50-S-0110-01S | ||
| 13 | Install in the reverse order | ||
| Check | |||
| 14 | Check coolant level. | Depending on the findings, ↓ Correct coolant level. Drain/pour in coolant |
AR20.00-D-1142TSR |
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 15 | Check the leaktightness of the cooler when the engine is running. |
| Number | Designation | Model 907 with engine 642 | |
|---|---|---|---|
| BA20.40-N-1002-01TS | Nut, fan clutch to mechanical fan motor hub | Nm | 45 |