 |
Risk of injury
. Skin or eye injuries may result when handling hot or glowing objects. |
Wear protective gloves, protective clothing and safety glasses, if necessary. |
AS00.00-Z-0002-01A |
  |
Remove/install |
|
|
| 1 |
Remove glow output stage |
|
AR15.20-D-4500TSR |
| 2 |
Remove screws (3) |
M6 |
*BA00.10-N-1002-01A |
| 3 |
Remove boost pressure sensor (7) |
|
AR09.41-D-2006TSR |
| 4 |
Remove coolant pump switchover valve |
|
AR20.10-D-3000TSR |
| 5 |
Remove switchover valve (4) |
Do not separate lines. |
|
| 6 |
Disconnect electrical connection (5) |
|
|
| 7 |
Remove electrical connector (5) from bracket (6) |
To do this unlock retaining tab. |
|
| 8 |
Remove temperature sensor (1) |
Ensure that the electrical wiring harness (2) is correctly routed. Coat the thread of the temperature sensor (1) with heat-resistant lubricant. |
|
| |
|
Temperature sensor upstream of exhaust gas turbocharger to exhaust manifold |
*BA07.04-N-1002-02TSR |
| |
|
Paste, hot lubrication 1 kg, DBL 6879.20 |
*BR00.45-Z-1005-06A |
| 9 |
Install in the reverse order |
|
|
 |
Check |
|
|
|
Risk of accident
from vehicle starting off by itself when engine running. Risk of injury
(bruises and burns) resulting from working on the engine while it is being started or when it is running. |
Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A |
| 10 |
Check for leak tightness with engine running |
Visual inspection only. |
|