LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2019 >> Sprinter 3500XD Van Cargo, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Timing >> Testing & Repair >> Check Timing Chain - Ar05.10-D-7600TSF
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Timing Chain - Ar05.10-D-7600TSF

Engine 651 in model 907 

Shown on model 907 

G13786209
CAUTION Risk of injury  to skin and eyes due to handling of engine oil. Risk of poisoning  caused by swallowing engine oil Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.
AS18.00-Z-0001-01A
REMOVING Remove     
1 Remove the chain tensioner Engine 651 in model 907 AR05.10-D-7800TSR 
INSPECT Check     
2 Mark the scale of the measuring chain tensioner (1) for better legibility at 82 mm and at 84 mm with a colored pencil SPECIAL TOOL Measuring chain tensioner Fig 1
3 Install the measuring chain tensioner (1) NOTES
Install the SPECIAL TOOL measuring chain tensioner (1) without seal.
Otherwise a wrongly measurement value will be determined.
 
    TORQUE SPECIFICATION Measuring chain tensioner to cylinder head *BA05.10-N-1002-01TS 
    SPECIAL TOOL Measuring chain tensioner Fig 1
WARNING Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities. No parts of the body or limbs should be within the operating area of mechanical components when moving components. AS00.00-Z-0009-01A
4 Turn engine on crankshaft in direction of engine rotation and, in doing so, read off the greatest indicator value from measuring chain tensioner (1) IMPORTANT The greatest indicator value is recognized at the top dead center. Have a second person assist you.  
    Wear dimension of timing chain stretch *BE05.10-N-1001-03S 
    SPECIAL TOOL Counterholder Fig 2
    SPECIAL TOOL Counterholder Fig 4
    SPECIAL TOOL Counterholder
For a reached or exceeded degree of wear of the timing chain stretch

Replace timing chain.
Fig 3
    Engine 651 in model 907 AR05.10-D-7601TSR 
5 Remove the measuring chain tensioner (1) SPECIAL TOOL Measuring chain tensioner Fig 1
INSTALLING Install     
6   Engine 651 in model 907 AR05.10-D-7800TSR 
TIMING CHAIN CHECK VALUES

Number Designation Engine 651
BE05.10-N-1001-03S Wear dimension of timing independent of chain stretch mileage mm -
  dependent on mileage ≤ 250,000 km mm > 82
> 250,000 km mm > 84
TORQUE SPECIFICATION TIMING CHAIN, CHAIN TENSIONER

Number Designation Engine 651 in model 907
BA05.10-N-1002-01TS Measuring chain tensioner to cylinder head Nm 20
Fig 1: Measuring Chain Tensioner (651 589 11 63 00)
G13786210
Fig 2: Counterholder (651 589 10 40 00)
G13786211
Fig 3: Counterholder (651 589 08 40 00)
G13786212
Fig 4: Counterholder (651 589 00 40 00)
G13786213