Turning Angle Sensor, Component Description - GF28.19-D-3204TSB

Model 907 

with code ZG1 (Engageable all-wheel drive) 

Model 907 

with code ZG3 (Engageable all-wheel drive with gear reduction) 

Location, shown with code ZG3 (Engageable all-wheel drive with transmission ratio) 

Task 

The turning angle sensor is used to record the actual position of the selector drum.

Structure 

The turning angle sensor is a Hall sensor.

Function 

The all-wheel drive control unit (N45) uses the transmitted Hall signal to determine the actual position of the selector drum.