Remove/Install Pressure Transducer For WASTEGATE Aneroid Capsule - Ar09.40-D-1005TSR

Engine 651 in model 907 

	Remove/install
1	Remove glow output stage		AR15.20-D-4500TSR
2	Remove boost pressure sensor (6)	To do this, remove bolts (7). Do not disconnect electrical connector. M6	*BA00.10-N-1002-01A
3	Remove hoses (2, 3, 8) from pressure transducer (1)	Observe assignment of hoses (2, 3, 8) to connections at pressure transducer (1). Check hoses (2, 3, 8) for damage. Mark assignment of hoses (2, 3, 8). Depending on findings ↓ Replace damaged hose (2, 3, 8).
4	Disconnect electrical connection (4)
5	Remove pressure transducer (1)	To do this, remove the screw/bolts (5). M6	*BA00.10-N-1002-01A
6	Install in the reverse order

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			8.8	10.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	9	13
		Phosphated	Nm	9	12

HEADLESS SCREWS/BOLTS: SCREWS/BOLTS AND NUTS, COARSE-PITCH THREAD

Number	Designation			12.9
BA00.10-N-1002-01A	M6	Galvanized	Nm	16
		Phosphated	Nm	14