000 588 03 21 00 Gas Detector - WS47.00-P-0019B
Model all (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart)
Used in FG 06/47/83/Set B
Purpose:
Hydrogen gas detection unit for measuring the hydrogen concentration. For example, for determining leakages in air conditioning systems in combination with forming gas (95 % nitrogen, 5 % hydrogen) or for determining leakages in hydrogen systems.
Test equipment category CAT_B.
Technical Note:
Leak location on A/Cs in combination with the leaktightness testing device W 000 588 19 21 00 (smart, cars, vans BOduty/ without any exemption).
Procurement information:
This criteria catalog serves to provide support for selection of variants of workshop equipment available on the free market. It just describes the minimum requirement for fulfilling the 000 588 03 21 00 Mercedes-Benz standard. There is therefore no reference made to manufacturer specific equipment or devices.
The gas detection unit can usually be sourced from manufacturers of approved leak testers or selected on the open market based on the criteria catalog.
Minimum requirements:
- Measuring range at least 10 ppm to 500 ppm.
- Measurement display: The hydrogen concentration is output in an increment of less than or equal to 10 ppm.
- The measuring tip is attached to a flexible extension (gooseneck).
- The device produces acoustic feedback regarding the hydrogen concentration for the user.