Unfasten/Fasten Cable Duct - Ar15.18-D-0004-01TSR
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A |
Engine 651 in model 907
| Number | Designation | 8.8 | 10.9 | ||
|---|---|---|---|---|---|
| BA00.10-N-1002-01A | M6 | Galvanized | Nm | 9 | 13 |
| Phosphated | Nm | 9 | 12 | ||
| Number | Designation | 12.9 | ||
|---|---|---|---|---|
| BA00.10-N-1002-01A | M6 | Galvanized | Nm | 16 |
| Phosphated | Nm | 14 | ||
- Remove filler neck for engine oil.
- Remove bolt (3)
.
- Remove cover (2) from cable duct (1).
- Disconnect electrical connection (4).
- Disconnect electrical connector (5).
- Disconnect electrical connectors (6).
- Remove electrical wiring harness (7) from high-pressure lines and position outside of the working area.
- Disconnect electrical connector (8).
- Remove electrical wiring harness (9) from bracket (10).
- Disconnect electrical connectors (11).
- Remove ground line (12) from cylinder head
- Disconnect electrical connectors (15).
- Remove screw (13)
- Position hose (14) outside of working area.
- Unclip cable duct (1) (arrows).
- Slightly raise cable duct (1).
Carefully raise cable duct (1).
Damage may otherwise be done to the engine wiring harness and the remaining electrical connectors.
- Fasten the cable duct (1) in reverse order.