Remove/Install Steering Wheel - Ar46.10-D-0100TS

Model 907 

Shown on model 907 with code C6L (Multifunction steering wheel) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Turn steering wheel (1) to center position.
2	Remove driver's airbag from steering wheel (1).		AR91.60-D-0663TS
3	Release and disconnect electrical connector (2).
4	Remove center screw (3).
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
		For this, counterhold steering wheel (1). Aid of helper required. Install new center bolt (3)
		Screw/bolt, steering wheel to steering shaft	*BA46.10-N-1002-05TS
5	Mark serrations on steering wheel (1) relative to steering shaft.
6	Remove steering wheel (1).	Assign marking at serrations on steering wheel (1) to marking on steering shaft.
7	Install in the reverse order.
	Check
8	Perform function test of horns.
9	Perform function test on buttons on steering wheel (1).	Model 907 with code C6L (Multifunction steering wheel)
10	Perform test drive to check the steering wheel position.	If steering wheel position is incorrect, ↓ Perform suitable repair measures.

STEERING WHEEL, STEERING COLUMN TUBE, STEERING SHAFT