Remove/Install Interior Protection Sensor In Load Compartment - Ar80.50-D-9834TS
Model 907.6
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Remove/install | |||
| 1 | Unclip interior protection sensor (1) at the side (arrow) | Fig 1 | |
| 2 | Remove interior protection sensor (1) from bracket (2) until the electrical connector (3) is accessible | ||
| 3 | Disconnect electrical connector (3) and remove interior protection sensor (1) | ||
| 4 | Install in the reverse order | ||
| Check | |||
| 5 | Perform function check of interior protection sensor (1) |