LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2019 >> Sprinter 2500 Van Crew, 2.0L Eng >> Repair and Diagnosis >> External Pages >> Different car >> Section 3190 (Electronic Control Modules (Service Information)) >> Module, Power Inverter (PIM) >> Removal And Installation >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Power Inverter Module (PIM) in the vehicle.
    GC0188573Courtesy of CHRYSLER GROUP, LLC
  2. Install the PIM mounting fastener (2) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  3. Connect the wire harness connector to the PIM connector receptacle (3).
  4. Install the PIM cover and remaining fasteners and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals