ECALL Speaker: Installation
WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Position the EAM speaker close to the speaker mounting bracket.
- Connect the instrument panel wiring harness connectors.
- Install and tighten the two screws for the EAM. Tighten the screws securely.
- Install the left front lower instrument panel closeout panel (1).
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.