LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2019 >> Sprinter 2500 Van Crew, 2.0L Eng >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation - Testing & Repair >> Testing & Repair >> Remove/Install Throttle Valve Actuator - Ar07.70-D-0005TSC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remove/Install Throttle Valve Actuator - Ar07.70-D-0005TSC

Engine 274 in model 907 

G13786710
  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Notes on avoiding damage through contamination and foreign objects   AH00.00-P-5000-01A
REMOVINGINSTALLING Remove/install     
1 Remove charge air hose downstream of charge air cooler.   AR09.41-D-8625TSC
2 Release and disconnect electrical connectors (1, 2, 3).    
3 Release bracket of purge line (6), release and disconnect purge line (6) at throttle valve actuator (M16/50).    
4 Seal exposed connections using suitable plugs. SPECIAL TOOL Record plug Fig 1
5 Unscrew screws (4) and remove throttle valve actuator (M16/50) with charge air line (5). INSTALLATION IMPORTANT : Install new sealing rings.  
    TORQUE SPECIFICATION Bolt, throttle valve actuator to charge air distributor *BA09.41-N-1001-01V 
6 Install in the reverse order    
  Concluding tasks     
7 Perform initialization of throttle valve actuator (M16/50) with vehicle diagnosis system and delete existing faults. When replacing throttle valve actuator (M16/50).  
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-D-2000-06TS
WARNING Risk of burn injuries,  suffocation and poisoning when working on the exhaust system and the components connected to it.
Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning  caused by skin contact with solid components of the exhaust.
Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. AS49.00-Z-0001-01A
WARNING Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
8 Conduct engine test run while checking for proper operation of the engine.    
TORQUE SPECIFICATION CHARGE AIR DISTRIBUTOR

Number Designation Engine 274 in model 907
BA09.41-N-1001-01V Bolt, throttle valve actuator to charge air distributor Nm 6
Fig 1: Record Plug (129 589 00 91 00)
G13786711