Remove/Install Fuel Pressure Sensor - AR07.04-P-0050GQ

ENGINE 276 in MODEL 166, 251, 292

Shown on engine 276.9 in model 166

	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contact with fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
	General information on work on gasoline direct injection system		AH07.00-P-2000-01A
	Remove/install
1	Detach ground line from battery	Engine 276 in model 166, 292	AR54.10-P-0003GZ
1	Detach ground line from battery	Engine 276 in model 251	AR54.10-P-0003RT
2	Remove partition wall between wheel wells	Engine 276 in model 251
2	Remove partition wall between wheel wells	Engine 276 in model 251	AR62.30-P-2400RT
3.1	Remove upper engine cover (2)	Engine 276.9 in model 166, 251
3.2	Remove upper engine cover	Engine 276.8 in model 166, 251, 292
4.1	Remove intake manifold (3)	Engine 276.9 in model 166, 251
4.1	Remove intake manifold (3)	Engine 276.9 in model 166, 251	AR09.20-P-1961GQ
4.2	Remove left air filter housing	Engine 276.8 in model 166, 251, 292
4.2	Remove left air filter housing	Engine 276.8 in model 166, 251, 292	AR09.10-P-1150GQC
5	Remove soundproofing over left rail	Engine 276.8 in model 166, 251, 292
6	Disconnect electrical connection (1) on fuel pressure and fuel temperature sensor (B4/25)
	Clean
7	Clean rail (4) in the area of the fuel pressure and temperature sensor (B4/25)	Assembly cleaner	*BR00.45-Z-1028-04A
8	Remove fuel pressure and temperature sensor (B4/25) from rail (4)	The fuel pressure and temperature sensor (B4/25) must be replaced after every disassembly.
8		Pressure and temperature sensor to fuel distributor	*BA07.52-P-1002-01G
9	Install in the reverse order
10	Read out fault memory using the diagnostic system and delete
			AD00.00-P-2000-04A
	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear buttoned-up and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
11	Check fuel system for leaks with engine running

FUEL DISTRIBUTOR

Number	Designation		Engine 276
BA07.52-P-1002-01G	Pressure and temperature sensor to fuel distributor	Nm	33

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1028-04A	Assembly cleaner	Adolf Wurth GmbH & Co. KG