Notes On Paintwork Repairs - Ah98.00-P-9408-02A
| i101 | Service Information: Refinishing paint | See SI98.00-P-0002A . |
Model 405 with body 405.82/84
Model all (4xWD, CAR, Light transporter)
Model all (TRUCK)
With post-repair refinishing only approved materials from our paint partners are to be used.
When applying filler the maximum recommended layer thickness of the approved paint manufacturer must be observed.
With the clear-coat system with higher scratch resistance, the corresponding notes must be observed.
All approved materials and manufacturers can be found on the website: under the "Paint technology guidelines" category.
Only for model 405 with body 405.82/84
Mask off the vehicles well before painting, since any overspray is very difficult to remove even just a few hours after painting.
Dried paint residues are very difficult to remove from your hands after a few hours. Before starting any work, and after cleaning your hands, rub a skin protection agent into them.