Remove/install headbag - AR91.60-P-0697W
MODEL 172.4
Shown on left front door
| Remove/install | |||
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Notes on performing repair, body work and welding on vehicles with airbags or emergency tensioning retractor units | AH91.00-P-0002-01M | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Assessment of airbag and emergency tensioning retractor units in accident vehicles | AH91.00-P-0006-01B | ||
| Legal regulations on handling and storing airbags and emergency tensioning retractor units | AH91.00-P-0004-01A | ||
| 1 | Remove left or right door lining | AR72.10-P-1000W | |
| 2 | Disconnect ground line at the on-board electrical system battery | AR54.10-P-0003W | |
| 3 | Unscrew nuts (2) from headbag unit (1) | *BA91.60-P-1022-01A | |
| 4 | Disconnect electrical connector (3) from left headbag squib (R12/39) or right headbag squib (R12/40) | ||
| 5 | Remove headbag unit (1) | ||
| Notes on disposing of airbag and emergency tensioning retractor units | OS91.00-P-0001-01A | ||
| 6 | Install in the reverse order | ||
| 7 | Connect Star Diagnosis and check Supplemental Restraint System (SRS) | When replacing headbag unit (1). | AD00.00-P-2000-04A |
AIRBAG
| Number | Designation | Model 172 | |
|---|---|---|---|
| BA91.60-P-1022-01A | Nut, head airbag to driver door inner part | Nm | 6 |