LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2010 >> Sprinter 3500, 2D Cab Chassis Extended >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Testing & Repair Part 1 >> Testing & Repair >> Check Camber, Assign Tabular Value - Ar40.20-D-0322-02D
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Camber, Assign Tabular Value - Ar40.20-D-0322-02D

Model 906 

except code A50 (Front axle with increased load capacity) 

except code ZG1 (Engageable all-wheel drive) 

except code ZG3 (Engageable all-wheel drive with gear reduction) 

except code ZU8 (National version for USA) 

TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1001-13A Permissible difference in front axle camber between left and right sides of vehicle ∠° 0°20'
For adjustment ∠° 0°10'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1005-13A Camber with front-axle load of 1850 kg or for transverse control arm angle     ° 6, 6
Permissible camber value Min.   ∠° 0°-35'
max.   ∠° 0°5'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°-25'
Values OK For wear on outside shoulder of tire ∠° 0°-35'
For significant wear on outside shoulder of tire ∠° 0°-35'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1006-13A Camber with front-axle load of 1800 kg or for transverse control arm angle     ° 7, 2
Permissible camber value Min.   ∠° 0°-28'
max.   ∠° 0°12'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°-18'
Values OK For wear on outside shoulder of tire ∠° 0°-28'
For significant wear on outside shoulder of tire ∠° 0°-28'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1007-13A Camber with front-axle load of 1750 kg or for transverse control arm angle     ° 7, 8
Permissible camber value Min.   ∠° 0°-21'
max.   ∠° 0°19'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°-11'
Values OK For wear on outside shoulder of tire ∠° 0°-21'
For significant wear on outside shoulder of tire ∠° 0°-21'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1008-13A Camber with front-axle load of 1700 kg or for transverse control arm angle     ° 8, 4
Permissible camber value Min.   ∠° 0°-14'
max.   ∠° 0°26'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°-4'
Values OK For wear on outside shoulder of tire ∠° 0°-14'
For significant wear on outside shoulder of tire ∠° 0°-14'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1009-13A Camber with front-axle load of 1650 kg or for transverse control arm angle     ° 9
Permissible camber value Min.   ∠° 0°-6'
max.   ∠° 0°34'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°4'
Values OK For wear on outside shoulder of tire ∠° 0°-6'
For significant wear on outside shoulder of tire ∠° 0°-6'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1010-13A Camber with front-axle load of 1600 kg or for transverse control arm angle     ° 9, 6
Permissible camber value Min.   ∠° 0°2'
max.   ∠° 0°42'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°12'
Values OK For wear on outside shoulder of tire ∠° 0°2'
For significant wear on outside shoulder of tire ∠° 0°2'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1011-13A Camber with front-axle load of 1550 kg or for transverse control arm angle     ° 10, 3
Permissible camber value Min.   ∠° 0°9'
max.   ∠° 0°49'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°19'
Values OK For wear on outside shoulder of tire ∠° 0°9'
For significant wear on outside shoulder of tire ∠° 0°9'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1012-13A Camber with front-axle load of 1500 kg or for transverse control arm angle     ° 10, 9
Permissible camber value Min.   ∠° 0°17'
max.   ∠° 0°57'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°27'
Values OK For wear on outside shoulder of tire ∠° 0°17'
For significant wear on outside shoulder of tire ∠° 0°17'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1013-13A Camber with front-axle load of 1450 kg or for transverse control arm angle     ° 11, 5
Permissible camber value Min.   ∠° 0°26'
max.   ∠° 1°6'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°36'
Values OK For wear on outside shoulder of tire ∠° 0°26'
For significant wear on outside shoulder of tire ∠° 0°26'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1014-13A Camber with front-axle load of 1400 kg or for transverse control arm angle     ° 12, 1
Permissible camber value Min.   ∠° 0°34'
max.   ∠° 1°14'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°44'
Values OK For wear on outside shoulder of tire ∠° 0°34'
For significant wear on outside shoulder of tire ∠° 0°34'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906 except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1015-13A Camber with front-axle load of 1350 kg or for transverse control arm angle     ° 12, 8
Permissible camber value Min.   ∠° 0°42'
max.   ∠° 1°22'
Adjustment value for camber Values not OK Initial setting, correction ∠° 0°52'
Values OK For wear on outside shoulder of tire ∠° 0°42'
For significant wear on outside shoulder of tire ∠° 0°42'
TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER

Number Designation Model 906
except code A50/ZG1/ZG3/ZU7/ZU8
BE40.20-D-1016-13A Camber with front-axle load of 1300 kg or for transverse control arm angle     ° 13, 4
Permissible camber value Min.   ∠° 0°51'
max.   ∠° 1°31'
Adjustment value for camber Values not OK Initial setting, correction ∠°  
Values OK For wear on outside shoulder of tire ∠° 0°51'
For significant wear on outside shoulder of tire ∠° 0°51'
  1. Note down the permissible camber value in the table based on the determined front-axle level.
  2. Compare the permissible camber value against the actual value from the wheel alignment check.

    IMPORTANT Observe permissible difference in front axle camber between right and left sides of the vehicle.

  3. Determine level of wear on outside shoulder of tire.

    For an actual value within the permissible camber value and with wear on outside shoulder of the tire.

    IMPORTANT If the difference between the inner and outer tire tread channel depth is greater than 2 mm, there is a high level of wear on the outside shoulder of the tire.

  4. Take adjustment value from table and note down.
scientia non olet · About LEMON Manuals