Transmission -- Testing & Repair -- 164 Chassis

• General Information
  • Notes on automatic transmission - AH27.19-P-0001-01NKB
• Testing & Repair
  • Testing and repair work: Passenger cars: Automatic transmission - AR27.00-Z-9722AC
  • Automatic Transmission Oil Level Inspection (Correct If Necessary) - AR27.00-P-0100W
  • Filling automatic transmission with fluid - AR27.00-P-0270W
  • Remove/install transmission with torque converter - AR27.10-P-0500
    • Remove/install transmission with torque converter - AR27.10-P-0500GZA (ML350, ML550, GL450, GL550)
      • Notes
      • Remove/install torque converter - AR27 20-P-0500-01W
      • Remove corrosion from crankshaft - AR03.20-P-1000-01A
    • Remove/install transmission with torque converter - AR27.10-P-0500GZ (ML500)
    • Remove/install transmission with torque converter - AR27.10-P-0500GZS (ML63 AMG)
  • Separate/connect transmission oil line - AR27.10-P-0501-03RT
  • Fasten transmission on assembly stand - AR27.10-P-0600-01W
  • Remove/install automatic transmission oil pan - AR27.10-P-7030W
  • Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200W
    • Notes
    • Insert selector valve into driver of detent plate - AR27.19-P-0200-01A
  • Disassemble and assemble electrohydraulic controller unit - AR27.19-P-0220B
  • Remove/install control solenoid valves of electric controller unit - AR27.19-P-0212A
  • Remove/install intelligent servo module - AR27.19-P-0550GZA
  • Detach/attach torque converter on driver - AR27.20-P-0100
    • Detach/attach torque converter on driver - AR27.20-P-0100-01A
    • Detach/attach torque converter on driver - AR27.20-P-0100-01GZ
  • Remove/install torque converter - AR27.20-P-0500-01W
  • Remove/install radial shaft sealing ring on front transmission cover - AR27.30-P-4970GZ
  • Remove/install radial shaft sealing ring at output flange - AR27.40-P-0205GZ
  • Remove/install shift shaft radial shaft sealing ring - AR27.40-P-0220
    • Remove/install shift shaft radial shaft sealing ring, Transmission with intelligent servo module (ISM) - AR27.40-P-0220A
    • Remove/install shift shaft radial shaft sealing ring, Transmission with range selector lever - AR27.40-P-0220B
  • Remove/install oil pump radial shaft sealing ring - AR27.40-P-0300A
  • Remove/install shield at transmission - AR27.40-P-0700-01GZ
  • Remove/install grooved ball bearing - AR27.50-P-0600
    • Install grooved ball bearing in rear transmission housing - AR27.50-P-0600-05A
    • Measure end play between park pawl gear and grooved ball bearing - AR27.50-P-0600-06A
  • Detach/attach transmission housing on torque converter housing. - AR27.50-P-0601W
    • Notes
    • Remove grooved ball bearing in rear of transmission housing - AR27.50-P-0601-01A
  • Remove/install main components of the transmission - AR27.50-P-0610W
  • Remove/install K3, rear hollow shaft, rear planet carrier and output shaft - AR27.50-P-0611W
  • Removing/installing drive shaft with K2, front planet carrier, internal plate carrier with K1 and B3 - AR27.50-P-0612W
  • Output flange removal and installation - AR27.50-P-0620-02W
  • Remove/install multi-disk brake B1 and oil pump - AR27.50-P-0721W
  • Remove/install BPC clutch pack, multi-disk brake B2 and park pawl gear - AR27.50-P-0782W
  • Checking and adjusting end play between shim and retaining ring - AR27.50-P-0810-01A
  • Dismantle and assemble rear tubular shaft - AR27.50-P-0851W
  • Disassemble/assemble multi-disk brake B1 - AR27.50-P-0870W
  • Disassemble/assemble multi-disk brake B2 - AR27.50-P-0880W
    • Notes
    • Assembling piston guide and external plate carrier of multi-disk brake B2 - AR27.50-P-0880-01W
  • Disassemble/assemble multi-disk brake B3 - AR27.50-P-0890W
  • Dismantling and assembling clutch K1 - AR27.51-P-0800W
  • Disassemble/assemble K2 clutch - AR27.51-P-0820W
  • Disassemble/assemble clutch K3 - AR27.51-P-0830W
  • Measure and adjust clearance - AR27.51-P-7229W
    • Notes
    • Measure and adjust clearance of BR multi-disk brake - AR27.51-P-7229-01W
    • Adjustment values of multi-disk brake B1
    • Adjustment values of multi-disk brake B2
    • Adjustment values of multi-disk brake B3
    • Adjustment values of multi-disk clutch K1
    • Adjustment values of multi-disk clutch K2
    • Adjustment values of multi-disk clutch K3
  • Flushing out oil cooler lines and oil cooler - AR27.55-P-0001GZ
  • Flush out automatic transmission and torque converter - AR27.55-P-0100B
  • Remove/install DIRECT SELECT selector lever - AR27.60-P-0931GZ
  • Remove, install park pawl mechanism - AR27.60-P-0950W