Wheels, Chassis Alignment Check -- Testing & Repair -- S-Class (221)
- Testing & Repair
- General information on vehicle level measurement - AR40.00-P-0202A
- Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9000AA
- Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9221AA
- Checking condition of rim - AR40.10-P-1010-01A
- Checking tires for lateral and radial runout - AR40.10-P-1025A
- Tire, support ring removal - AR40.10-P-1030-01MB
- Tire, support ring installation - AR40.10-P-1030-02MB
- Replace tires - AR40.10-P-1030MB
- Replace tires - AR40.10-P-1030SX
- Mounting centering sleeve - AR40.10-P-1040-01A
- Balancing wheels - AR40.10-P-1040SX
- Draining TIREFIT sealant out of tires - AR40.10-P-1080SX
- Perform smooth running optimization - AR40.10-P-3201-01A
- Perform smooth operation optimization - AR40.10-P-3201A
- Remove/install wheel sensor - AR40.15-P-0080SX
- Remove/install wheel antenna - AR40.15-P-0090SX
- Remove, install tire pressure monitoring system control unit - AR40.15-P-0100SX
- Remove/install TPM [RDK] antenna - AR40.15-P-0300SX
- Perform a wheel alignment check - AR40.20-P-0200SX
- Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230SX
- Carry out conditions and tests for chassis alignment - AR40.20-P-0260SX
- Adjust rear-axle toe - AR40.20-P-0261SX
- Adjust camber and caster at the front axle - AR40.20-P-0263SX
- Adjust front axle toe - AR40.20-P-0264SX
- Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary - AR40.20-P-0301SX
- Install repair bolt - AR40.20-P-0322-01SX
- Check caster and assign to tabular value - AR40.20-P-0322-03SW
- Check caster, match with value in table - AR40.20-P-0322-03SX
- Check caster, match with value in table - AR40.20-P-0322-03SXS
- Check caster, match with value in table - AR40.20-P-0322-03SY
- Check toe-out angle - AR40.20-P-0325SX
- Checking rear axle camber - AR40.20-P-0331SX
- Checking accident vehicles and vehicles possibly damaged in an accident - AR40.30-P-0400SX
- Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01SX
- Preparations for distance and comparison measurements - AR40.30-P-0401SX
- Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01SX
- Carry out distance and comparison measurements on rear axle - AR40.30-P-0402-02SX
- Carry out distance and comparison measurements on front and rear axles - AR40.30-P-0402SX