LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2002 >> SLK320 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Anti-Theft Systems) >> Removal & Installation >> PSE Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

WARNING: This page is about a different car, the 2000 Mercedes-Benz SLK230 and 1999 Mercedes-Benz SLK230. However, it is still accessible from the selected car via links, so may be relevant.

Open trunk lid and remove trunk floor covering. Remove jack box from floor and open foam block to access Pneumatic System Equipment (PSE) control module. Disconnect PSE electrical connectors and vacuum connector. To install, reverse removal procedure. PSE will need to be version coded. See PROGRAMMING .

scientia non olet · About LEMON Manuals