October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Speed Sensor (VSS) Adaption

After replacing ME-SFI control module, Crankshaft Position (CKP) sensor, starter ring gear or motor mount, sensor adaptation must be performed. Run engine until coolant temperature is more than 158°F (70°C). Drive vehicle. With gear selector in position 3, increase engine speed to approximately 2100 RPM, then hold a 50 percent engine load for approximately 30 seconds. Using scan tool, verify VSS adaptation has occurred.