DTC Description
- Fault Memory & Actuation Of MIL - After 2 consecutive driving cycles with fault.
- Frequency Of Testing - Continuous.
- Checked Signal Or Status - Engine speed.
- Upper Limit Value - Specified value plus 200 RPM.
- Lower Limit Value - Specified value minus 100 RPM.
- Duration Of Test - Approximately 30 seconds.
- Test Conditions - Engine temperature more than 68°F (20°C), A/C off and vehicle stationary.
NOTE:
If activation of actuator motor in throttle valve actuator is changed by the ME-SFI control module, the new value must be reached within approximately 25 seconds.