Remove/install side window - AR67.30-P-2305C: Notes

MODEL 129 

Fig 1: Identifying Side Window Components - Model 129

	Remove
1	Prepare glue cartridge		AR67.10-P-1000-07P
		Betagun 2K electric cartridge gun	*WH58.30-Z-1002-20A  *BR00.45-Z-1015-02A
2	Remove coupe roof	See operating instructions
3	Remove window molding		ra68001290420x
4	Remove molding from side window		ra68001290570x
5	Protect window cutout on coupe roof against damage with adhesive tape (1).
	Risk of injury  from slipping when clamping blade in the multicutter and from glass splinters when cutting out glued windows	Always interrupt air supply when inserting or removing blade. Wear protective gloves and eye protection.	AS67.00-Z-0001-01A
6	Cut side window out with cutting blade	If the window is to be cut out without damage use cutting wire in bottom area (arrows)	AR67.30-P-4050-01C
			Figure
			*WH58.30-Z-1003-20A
7	Remove side window from body with suction cup		*WE58.40-Z-1029-11A
	Install
8	Prepare body flange for installation of window	Allow primer to air-dry for min. 10 minutes	AR67.10-P-1501-01CA
			Figure
			*WH58.30-Z-1003-20A
9	Prepare window for installation		AR67.10-P-1000-03P
10	Apply glue		AR67.10-P-1000-08P
		Betagun 2K electric cartridge gun Height of glue bead approx. 13 mm Install window within 10 minutes before adhesive force of glue starts to decrease	*WH58.30-Z-1002-20A
11	Installing side window		AR67.30-P-2305-03C
		Curing time is approx. 1 hour, measured from the time the side window is installed.	*WE58.40-Z-1029-11A
12	Install molding on side window		ra68001290570x
13	Install window molding		ra68001290420x

Fig 2: Identifying Cutting Blade (124 589 02 63 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1002-20A	Electric cartridge gun
WH58.30-Z-1003-20A	Multicutter

WORKSHOP EQUIPMENT

WE58.40-Z-1029-11A

Cup suction tool for window removal and installation

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1015-02A	Repair kit	A 220 670 00 93