LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1994 >> E320 2D Coupe >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Front Wheel Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wheel Speed Sensor: Removal

  1. Remove front wheel. With ignition off, separate coaxial cable in engine compartment. Remove from bracket. Pull cable downward from grommet in wheelhousing.
  2. Remove windshield washer reservoir before removing right speed sensor (if necessary). Loosen partition in engine compartment near coaxial cable. Lift partition slightly and pull out cable.
  3. Speed sensors have different protective tubes at left and right, identified in holder by "L" or "R". Before installing, ensure NO metal is on sensor magnetic edges. Coat sensor and steering knuckle bore with Molykote Long-Term 2 lubricant.
  4. Remove cover plate protective tube. Remove and discard speed sensor attaching bolt. Pull speed sensor from steering knuckle bore.
scientia non olet · About LEMON Manuals