Section 49 (Throttle Control, Speed Control Systems - 140 Chassis)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
- Basic Knowledge
- Testing & Repair
- Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9104AB
- Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9119AB
- Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9120AB
- Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9140AA
- Adjust throttle control - AR30.10-P-1010
- Adjust throttle control - AR30.10-P-1010D
- Adjusting throttle control - AR30.10-P-1010EA
- Adjusting throttle control - AR30.10-P-1010EB
- Adjusting accelerator control - AR30.10-P-1010EC
- Adjusting throttle control - AR30.10-P-1010F
- Adjusting accelerator control - AR30.10-P-1010FA
- Turning connecting rod Bell crank of right-hand steering/left-hand steering standardized - AR30.10-P-1010-01E
- Removing and installing throttle control cable - AR30.10-P-3400
- Remove/install accelerator pedal - AR30.12-P-1321D
- Removing and installing firewall pivot point with accelerator pedal lever - AR30.12-P-3022D
- Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262
- Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262E
- Removing and installing electronic accelerator with throttle valve body - AR30.20-P-1262EA
- Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262F
- Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262FA
- Removing and installing idle speed control (ISC) actuator - AR30.22-P-1152D
- Maintenance
- General Maintenance
- Repair & Adjustments
- Removing and Installing Bowden Cable - RA30001190025X(30-0025)
- Functional description (for manual transmission version valid up to May 93) - RA30001240500X(30-500)
- Testing with adapter - RA30001240504X(30-504)
- Testing reference resistor - RA30001240506X(30-506)
- Removal and installation of cruise control actuator - RA30001240541X(30-541)
- Removal and installation of push-button switch - RA30001240545X(30-545)
- Adjusting connecting rod or control cable - RA30001240561X(30-561)
- Removal and installation of cruise control amplifier - RA30001240565X(30-565)
- Removal and installation of cruise control reference resistor - RA30001240566X(30-566)
- Removal and installation of switch on clutch pedal (up to May 93) - RA30001240575X(30-575)
- Programmed repair - Tempomat/cruise control - RA3000124PR00X
- Technical revisions - Cruise control/Tempomat - Models 124, 129, 140, 201 - RA3000124TA00X
- Removal, adjustment and installation of Bowden cable - ra30006023402x(3402)
- Electronic accelerator pedal, Tempomat cruise control/idle speed control - RA3000FLH0010X(30-0010)
- General - RA3000TPM0000X(30-0000)
- Brief description - RA3000TPM0002X(30-0002)
- Location of components - RA3000TPM0004X(30-0004)
- Function description - RA3000TPM0006X(30-0006)
- Individual functions - RA3000TPM0008X(30-0008)
- Notes on towing as well as test and adjustment work - RA3000TPM0010X(30-0010)
- Wiring diagrams (30-580)
- Removing and Installing Accelerator Pedal - ra300b6021321x(1321)
- Removing and Installing Firewall Bearing for Accelerator Pedal Lever - ra300c6023022x(3022)
- Accelerator Control Linkage (1010)
- Removal and installation of electronic accelerator actuator with the throttle valve assembly - ra30lh1041262x(1262)
- Removal and installation of control unit for electronic accelerator pedal Tempomat cruise control/idle speed control (LLR) idle speed control (LLR) - ra30lh1041272x(1272)
- Removal and installation of accelerator pedal - ra30lh1041321x(1321)
- Removal and installation of firewall bearing with accelerator pedal lever - ra30lh1043022x(3022)
- Removal and installation of Bowden cable - ra30lh1043402x(3402)
- Technical modifications: Accelerator control - ra30lh104ta00x
- Component Modifications