LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1987 >> 300D >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Diesel >> Testing >> Reference Resistor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Reference Resistor

  1. With engine off, disconnect reference resistor connector. Reference resistor is located next to altitude correction capsule. Connect multimeter and set to volt scale.
  2. Probe and check voltage between terminals No. 1 and 2. Voltage reading should be 5 volts. If voltage reading is to specification, replace reference resistor. If voltage reading is not to specification, repair open circuit.
scientia non olet · About LEMON Manuals