September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Testing Function Of ABS Indicator Lamp (Diode In Locking Direction)
- If Green lamp lights and digital readout is between 2.5-5.5 volts, circuit is okay. Go to TEST 16. If Green lamp does not light and digital readout is lower than 2.5 volts or higher than 5.5 volts go to step 2).
- Check ABS indicator lamp for being defective. Replace as necessary. Check harness wire to indicator for interruption. If electrical system is okay, replace hydraulic and electronic control units.