Lower Control Arm: Installation
To install lower control arm, reverse removal procedure.
NOTE:
Use new lock nuts on upper and lower ball joints.
Tighten nuts and bolts to specifications.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) |
|---|---|
| Lower Shock Absorber Mount | 18 (2.5) |
| Stabilizer Bar Bolts | 18 (2.5) |
| Steering Linkage Bolts | 25 (3.5) |
| Steering Knuckle Arm Bolts | 58 (8.0) |
| Upper Control Arm Cam Bolts | 43 (6.0) |
| Lower Control Arm Cam Bolts | 87 (12.0) |
| Upper Ball Joint | 43 (6.0) |
| Lower Ball Joint | 58 (8.0) |
| Engine Mounting Bolts | 25 (3.5) |
| Suspension Mounting Bolts | 33 (4.6) |