October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Shift-Lock Solenoid Specification
| Terminal |
Connected to |
Test condition |
Voltage (V) |
| A |
IG1 relay |
Ignition switched ON (engine on) |
B+ |
| Except above |
Below 1.0 |
| D |
Start stop unit |
Under any condition |
Below 1.0 |
- If the voltage is not as indicated in the table, repair or replace the related wiring harness.
- If the voltage can be verified as indicated in the table, replace the selector lever component. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)