LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Wiper/Washer System) >> Washer Fluid-Level Sensor Removal/Installation >> Remove Front Tires (RH) >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Remove Front Tires (RH): Notes

WARNING: This page is about a different car, the 2024 Mazda CX-90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove using the procedure shown in the figure below.
    • the figure below shows the right side (same as left side).
    Fig 1: Front Wheel And Tire Or Nut With Torque Specification (RH)
    G16691869Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Nut 127.5 N.m {13 kgf.m, 94.05 ft.lb}
2 Wheel and tire (See Wheel and tire installation note ) -