PID/data monitor inspection
WARNING: This page is about a different car, the 2024 Mazda CX-90. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2.
- Switch the main power ON (READY off).
- Display the following PID using the data monitor function. (Refer to [PID/DATA MONITOR INSPECTION
] in the Troubleshooting Service Information) (Refer to [PID/DATA MONITOR TABLE [DSC]
] in the Troubleshooting Service Information)
- [BRK_FLD_STAT]
- Verify that the PID value [BRK_FLD_STAT] conforms to the brake fluid level in the brake fluid reserve tank.
- If it cannot be verified, replace the electronically controlled brake unit. (See ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION [L.H.D.] )