October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Relay And Fuse Block Disassembly/Assembly
- Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure below.
 Courtesy of MACK TRUCKS, INC.
|
- Move the flathead screwdriver in the direction of the arrow (1) shown in the figure below, pull up relay and fuse block No. 1 in the direction of the arrow (2) shown in the figure below, and detach the relay and fuse block No. 2 tab from relay and fuse block No. 1.
 Courtesy of MACK TRUCKS, INC.
|
- Detach all the relay and fuse block No. 2 tabs from relay and fuse block No. 1, and remove relay and fuse block No. 1 from relay and fuse block No. 2.
- Assemble in the reverse order of disassembly.