October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Remove Power Disconnection Relay

Remove using the procedure shown in the figure below

Fig 1: Power Disconnection Relay, Connector, Band And Nuts With Torque Specification

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATION

Procedure	Part name
1	Nut	-	5.5 N.m {54 kgf.cm, 46 in.lb}
2	Band	Non-reusable	-
3	Connector	-	-
4	Nut	-	5.5 N.m {54 kgf.cm, 46 in.lb}
5	Power disconnection relay	-	-