WIRELESS CHARGER (Qi) INSPECTION
WARNING: This page is about a different car, the 2024 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The integrity of the wireless charger (Qi) cannot be determined by a single unit inspection. When inspecting the wireless charger (Qi), perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the wireless charger (Qi) DTC inspection and verify if DTCs related to the wireless charger (Qi) are detected. (Refer to the
[DTC INSPECTION [CONNECTIVITY MASTER UNIT (TYPE-A)]
] in the appropriate service information
)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC INSPECTION [CONNECTIVITY MASTER UNIT (TYPE-A)] ] in the appropriate service information )