October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PIDs [MAP_VOLT] and [MAP]. (Refer to PID/DATA MONITOR INSPECTION .)
- Compare the voltage and manifold absolute pressure indications for the PIDs [MAP_VOLT] and [MAP] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD VOLTAGE SPECIFICATION
| MAP_VOLT |
MAP |
Remarks |
| V |
kPa {kgf/cm2
, psi} |
| Approx. 4.04 |
100 {1.02, 14.5} |
Ignition switched ON (engine off) |
| Approx. 1.40 |
35 {0.36, 5.1} |
Idle (after warm up) |
| Approx. 1.01 |
26 {0.27, 3.8} |
Racing (Engine speed: 2, 000 rpm) |