DTC C103F-54: Electronically Controlled Brake Unit System (Unperformed Initialization Procedure)

C103F-54: (DSC) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Electronically controlled brake unit system (unperformed initialization procedure)
Detection condition	The electronically controlled brake unit detects that the linear actuator position sensor initialization was not performed.
Fail-safe	(See DTC TABLE [DSC] .)
Possible cause	Electronically controlled brake unit malfunction (the initialization procedure for the linear actuator position sensor has not been performed.) (Refer to [ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION] in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable