September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Sensor Cover Removal/Installation
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION
.)
- Move sensor cover No. 1 in the direction of the arrow shown in the figure and detach the tabs from sensor cover No. 2.
 Courtesy of MAZDA MOTORS CORP.
|
- Move sensor cover No. 1 in the direction of the arrow shown in the figure and remove it while detaching the guides.
 Courtesy of MAZDA MOTORS CORP.
|
- Disconnect the connector.
 Courtesy of MAZDA MOTORS CORP.
|
- Move sensor cover No. 2 in the direction of the arrow shown in the figure and remove it while detaching the tabs.
 Courtesy of MAZDA MOTORS CORP.
|
- Install in the reverse order of removal.