DTC C0082-68: Abs Control [DSC HU/Control Module]: Notes
DTC C0082:68 (DSC HU/Control Module) DETECTION CONDITION AND POSSIBLE CAUSE
| DTC |
C0082:68 |
ABS control |
| DETECTION CONDITION |
- ABS control continuing for 60 s or more is detected.
NOTE:
- The DTC may occur if the vehicle is driven under the following conditions.
- ABS operates continuously over long distances and long periods when braking on slippery road surfaces
- Wheel speed differences occur due to differences in tire tread wear or tire diameter
- Decreased pressure or hold condition continues for 1.28 s on all wheels
NOTE:
- The DTC may occur if the vehicle is driven under the following conditions.
- Decreased pressure/hold condition continues due to vehicle spin
- Decreased pressure/hold condition continues because friction coefficient between road surface and tires is significantly low and there is no grip force recovery even with ABS control
|
| FAIL-SAFE FUNCTION |
|
| POSSIBLE CAUSE |
- Friction coefficient between road surface and tires is significantly low such as when driving on slippery road surfaces.
- There is significant wear on individual tires.
- Tires with differing diameters have been installed.
- DSC HU/Control Module internal malfunction
|
| SYSTEM WIRING DIAGRAM |
- |