LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-50 Turbo >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Negative Battery Terminal Disconnection/Connection >> Required Procedure After Negative Battery Terminal Disconnection/Connection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Required Procedure After Negative Battery Terminal Disconnection/Connection

System name Conditions after disconnecting the negative battery terminal Required procedure Reference
Before disconnecting negative battery terminal After connecting negative battery terminal
i-stop system (vehicle with i-stop) Specified information in the PCM cleared and the i-stop does not operate normally. Verify PID "BATT_SOC" value and record. (1) Perform battery condition initial setting (i-stop setting). (2) (See BATTERY CONDITION INITIALIZATION SETTING (I-STOP SETTING) .)
Power liftgate (PLG) system - - Fully close the liftgate manually. (See POWER LIFTGATE (PLG) INITIALIZATION PROCEDURE .)
(1) Because the "BATT_SOC" value before disconnecting the negative battery terminal is required for the battery condition initial setting (i-stop setting), record the "BATT_SOC" value before disconnecting the negative battery terminal.

(2) For vehicles with i-stop, if the negative battery terminal is disconnected and re-connected, battery condition initial setting (i-stop setting) must be performed.
scientia non olet · About LEMON Manuals