LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-50 S Select >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> I-ACTIVSENSE (Service Information) >> 360°View Monitor System Aiming >> Front Camera Aiming Procedure >> Error code 12/15/18/1A
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Error code 12/15/18/1A

ERROR CODE 12/15/18/1A - DIAGNOSTIC PROCEDURE

Step Inspection Action
1 PERFORM FRONT CAMERA AIMING 
  • Perform the front camera aiming.
  • Was the front camera aiming procedure completed correctly?
 Yes The front camera aiming is completed. Perform the 360° view monitor system screen display verification procedure.
(See 360° VIEW MONITOR SYSTEM SCREEN DISPLAY VERIFICATION PROCEDURE .)
No If error code 12/15/18/1A is displayed 
  • Go to the next step.

    If code other than error code 12/15/18/1A is displayed 

  • Go to the procedure for the displayed error code.
2 VERIFY DTCs 
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Is a DTC displayed?
 Yes Go to the applicable DTC inspection.
(See DTC TABLE [360°VIEW MONITOR CONTROL MODULE] .)
(See DTC TABLE [VEHICLE CONTROL MODULE] .)
No If the front camera aiming is not completed correctly after performing the front camera aiming again, replace the 360° view monitor control module.
(See 360°VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION .)
scientia non olet · About LEMON Manuals