September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PIDs [APP1] and [APP2]. (See PID/DATA MONITOR INSPECTION .)
- Compare the voltage and opening angle indications for the PIDs [APP1] and [APP2] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD VOLTAGE SPECIFICATIONS
| Condition/ |
APP1 |
APP2 |
| V |
% |
V |
% |
| Accelerator pedal released |
Approx. 0.75 |
Approx. 15 |
Approx. 0.38 |
Approx. 7.45 |
| Accelerator pedal depressed |
Approx. 4.52 |
Approx. 90.58 |
Approx. 2.26 |
Approx. 45.49 |