LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> CX-9 Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> DSC HU/Control Module REMOVAL/INSTALLATION >> Brake Pipe Installation Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/Control Module and brake pipe joint referring to the figure.
    G11433112Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About LEMON Manuals