September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Blinds Pot Monitoring (BSM) Control Module (RH)
-: Not applicable
PID/DATA MONITOR ITEM REFERENCE - RH
| PID |
Unit/Operation |
Data contents |
Module control terminal |
| IL_MODE |
Off/On |
- Off: BSM OFF indicator light is illuminated in night mode.
- On: BSM OFF indicator light is illuminated in daytime mode.
|
- C (MS-CAN_H)
- D (MS-CAN_L)
|
| SHIFT_R |
Not_R/R |
- Not_R: Selector lever is in position other than R.
- R: Selector lever is in R position.
|
- C (MS-CAN_H)
- D (MS-CAN_L)
|
| SWA_POS |
° (deg) |
Displays steering angle signal (estimated absolute angle)
- Steering wheel in neutral position: Near 0 degrees
- Steering wheel turned to left: Changes from 0 degrees to positive
- Steering wheel turned to right: Changes from 0 degrees to negative
|
- C (MS-CAN_H)
- D (MS-CAN_L)
|
| VPWR_IG1 |
V |
Displays blind spot monitoring (BSM) control module (RH) power supply voltage |
I (Power position (IG1)) |
| VSPD |
KPH, MPH |
Displays vehicle speed |
- C (MS-CAN_H)
- D (MS-CAN_L)
|
| WRN_IND_R |
Off/On |
- Off: blind spot monitoring (BSM) warning light (RH) is not illuminated.
- On: blind spot monitoring (BSM) warning light (RH) is illuminated.
|
- A (Local CAN_H)
- B (Local CAN_L)
|