Hazard Warning Switch Inspection
WARNING: This page is about a different car, the 2021 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
- Remove the lower decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
- Remove the upper decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
- Verify that the continuity between the hazard warning switch terminals is as indicated in the table.
- If the continuity is as indicated in the table, go to the next step.
- If not as indicated in the table, replace the hazard warning switch. (See HAZARD WARNING SWITCH REMOVAL/INSTALLATION .)
- Apply battery voltage to hazard warning switch terminal A, and connect terminal B to ground.
- Verify that the LED illuminates.
- If the LED does not illuminate, replace the hazard warning switch. (See HAZARD WARNING SWITCH REMOVAL/INSTALLATION .)