LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Removal/Installation >> Intake CMP Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Intake CMP Sensor

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Seal cover (See SEAL COVER REMOVAL/INSTALLATION .)
    2. Front suspension tower bar (Vehicles with front suspension tower bar) (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION .)
    3. Intake manifold (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  3. Disconnect the intake CMP sensor connector.
  4. Remove the bolt.
    Fig 1: Intake Camshaft Position Sensor Bolt With Torque Specification
    G11274154Courtesy of MAZDA MOTORS CORP.
  5. Remove the intake CMP sensor.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals