Battery Tray Installation Note

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Set the battery tray to the installation position.
Tighten the battery tray installation bolts in the order shown in the figure.

Fig 1: Identifying Battery Tray Installation Bolts
Courtesy of MAZDA MOTORS CORP.

Tightening torque
- 22-30 N.m {2.3-3.0 kgf.m, 17-22 ft.lbf}
Install the wiring harness clip to the battery tray.

Fig 2: Identifying Wiring Harness Clip

Courtesy of MAZDA MOTORS CORP.