LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-9 Touring, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Dynamic Stability Control System (Service Information) >> DSC HU/Control Module REMOVAL/INSTALLATION >> Brake Pipe Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/Control Module.
    G11433110Courtesy of MAZDA MOTORS CORP.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Disconnect the brake pipes.
scientia non olet · About LEMON Manuals