LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (3 Of 6) >> DTC P0421-00: Catalytic Converter System >> Repeatability Verification Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repeatability Verification Procedure

  1. Start the engine and leave it idling for 1 min.
  2. Drive the vehicle normally for 1 5 min. After that, shift to 3rd gear and maintain the vehicle speed at approx. 40 km/h {25 mph}.
  3. Accelerate the vehicle to 60 km/h {37 mph}while in 3rd gear.
  4. Release the accelerator pedal and decelerate the vehicle to 40 km/h {25 mph}.
  5. Accelerate the vehicle to 60 km/h {37 mph}again while in 3rd gear.
  6. Drive the vehicle for 20 sat a speed of 50 km/h {31 mph}while in 3rd gear.
  7. Repeat Step  4 to  6 operations above 20 times.
    NOTE:
    • Match the engine coolant temperature in the recorded FREEZE FRAME DATA/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  8. Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the FREEZE FRAME DATA/snapshot data.
scientia non olet · About LEMON Manuals